Skip to main content

Contents for Black Book CTEVT

 Contents for Black Book CTEVT

REFER THE BLACK BOOK SAMPLE FROM THE COLLEGE LIBRARY. 

You must include following contents in the black book:

  1. Cover Page
  2. Page for the signature of Director, HOD and Project Supervisor
  3. Acknowledgement
  4. Abstract
  5. Table of Contents
Main Part
  1. Introduction (Background and related theory)
  2. Problem Statement
  3. Objectives
  4. Methodology (Step by step description of all the process that you have done to complete the project.  Detailed description of block diagram. Also give the details about all the components that you are using. Additional details that are unique to each and every project can also be presented here)
  5. Results and discussion
  6. Conclusion
  7. Future works( This is optional)
  8. References
  9. All the programming codes used in the project 

Comments

Post a Comment

Popular posts from this blog

Electric Machine II Notes

  Course Description : This course covers the electrical machines-three-phase induction motor and generator, single phase ac motors, synchronous generator and synchronous motor. It deals with the constructional details, operating principle, characteristics, testing methods of the above machines. Course content: Unit 1. Three Phase Induction Motor (15) 1.1 Constructional details – Yoke, stator, stator windings, and rotor – squirrel cage type and phase wound type. 1.2 Operation – Production of rotating magnetic field, operating principle, reversing the direction of rotation. 1.3 Stand still condition – equivalent circuit, starting current and starting torque. 1.4 Running condition - equivalent circuit, running current and torque. 1.5 Torque-Speed characteristics, effect of applied voltage on T-S characteristic, effect of rotor resistance on T-S characteristic. 1.6 Power stages, losses and efficiency 1.7 Starting methods – Direct On-line starting, Primary resistor method, Autotrans...
1 comment
Read more

Electrical and Electronics Engineering Material

  Electrical and Electronics Engineering Material 3 rd Semester Course Description: This course deals with the properties of Magnetic, Resistor, and Dielectric and Semiconductor materials from the peripherals of electrical engine.     Course content:   Unit 1. Conducting Material [8] 1.1 Description of commonly used resistors, alloys of Nickel, Iron, Chromium, Aluminum. 1.2 Band structure of conductors, energy gap 1.3 Electrical properties: resistivity, conductivity, effect of temperature, concept of drift and mobility 1.4 Resistor alloys: 1.4.1 Alloys of Ni, Fe, Cr, Al 1.4.2 Mechanical characteristics 1.4.3 Industrial application     Unit 2. Magnetic material [20] 2.1. Classification based on ferrous material and non-ferrous material 2.2. Use and their characteristics 2.3. B-H characteristics 2.4. Hysteresis loop, eddy current losses 2.5. Magnetic permeability and susceptibility 2.6. Domain structure 2.7....
Post a Comment
Read more